<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<META content="MSHTML 5.00.3314.2100" name=GENERATOR></HEAD>
<BODY>
<DIV><FONT color=#0000ff face=Arial size=2><SPAN class=546170617-27052003>Hi
Mohan,</SPAN></FONT></DIV>
<DIV><FONT color=#0000ff face=Arial size=2><SPAN
class=546170617-27052003> You do not need to add the tasks of project B
again, after project B released. When you check out from Project B again to
a prep project. You need check and select baseline from reconfigure
properties. </SPAN></FONT></DIV>
<DIV><FONT color=#0000ff face=Arial size=2><SPAN
class=546170617-27052003></SPAN></FONT> </DIV>
<DIV><FONT color=#0000ff face=Arial size=2><SPAN
class=546170617-27052003>Project B is new it do not have baseline when you check
in the first time. It cause the problem you need add the tasks. After you check
in the first time, you have proper baseline. it won't need task
again.<BR></DIV><BR>
<P><B><FONT color=#800080 face="Comic Sans MS" size=2>Jean
Cao</FONT></B><BR><I></I><I></I><I><FONT color=#800080 face="Comic Sans MS"
size=2>Configuration management</FONT></I><BR><B></B><B></B><B><FONT
color=#008000 face="Comic Sans MS" size=2>Brooks Automation Software
Corp.</FONT></B><FONT face="Times New Roman"><BR></FONT><FONT
face=Wingdings>-</FONT><FONT color=#008000 face="Comic Sans MS" size=2> 100 -
13777 Commerce Parkway, Richmond, BC, V6V 2X3</FONT><FONT
face="Times New Roman"><BR></FONT><FONT color=#008000 face="Comic Sans MS"
size=2> Telephone: 604-214-5136</FONT> <FONT
face=Webdings></FONT> <FONT color=#008000 face="Comic Sans MS" size=2>
Facsimile: 604-214-5001</FONT><FONT face="Times New Roman"><BR></FONT><FONT
color=#008000 face="Comic Sans MS" size=2> Email:
jean.cao@brooks.com</FONT><FONT face="Times New Roman"></FONT> </P><BR>
<DIV></DIV></SPAN></FONT>
<BLOCKQUOTE>
<DIV align=left class=OutlookMessageHeader dir=ltr><FONT face=Tahoma
size=2>-----Original Message-----<BR><B>From:</B>
mohan_tarole@chennai.tcs.co.in
[mailto:mohan_tarole@chennai.tcs.co.in]<BR><B>Sent:</B> Tuesday, May 27, 2003
3:09 AM<BR><B>To:</B> opencm@armory.com<BR><B>Subject:</B> [OpenCM] Re:
Addition of subproject : Problem in reconfigure<BR><BR></DIV></FONT><BR><FONT
size=2><TT>Hi All,</TT></FONT> <BR><FONT size=2><TT>Thanks everybody for your
suggestions</TT></FONT> <BR><BR><FONT size=2><TT>I could sovle this problem,
by adding migration task of project B into the reconfigure template of project
A's new release.</TT></FONT> <BR><FONT size=2><TT>is it a brute force
method or this is the way to add the the project</TT></FONT> <BR><BR><FONT
size=2><TT>Now If I release this project and derive new project with new
release value , again do I need to add the tasks of project B?</TT></FONT>
<BR><FONT size=2><TT>If Yes , then what is the parmanent solution?</TT></FONT>
<BR><BR><FONT size=2><TT>I was also trying the method suggested by Dan Martin
of attribute copy.</TT></FONT> <BR><FONT size=2><TT>But as the project that I
added was already in the relased state, Attribute copy is failing (I've not
created the working project of project B)</TT></FONT> <BR><BR><BR><FONT
face=sans-serif size=2>Regards,<BR>Mohan <BR></FONT><BR><BR><BR>
<TABLE width="100%">
<TBODY>
<TR vAlign=top>
<TD>
<TD><FONT face=sans-serif size=2><B>opencm-request@armory.com</B></FONT>
<BR><FONT face=sans-serif size=2>Sent by:
opencm-bounces@armory.com</FONT>
<P><FONT face=sans-serif size=2>05/27/2003 10:47 AM</FONT> <BR><FONT
face=sans-serif size=2>Please respond to opencm</FONT> <BR></P>
<TD><FONT face=Arial size=1> </FONT><BR><FONT
face=sans-serif size=2> To:
opencm@armory.com</FONT> <BR><FONT face=sans-serif
size=2> cc:
</FONT> <BR><FONT face=sans-serif size=2>
Subject: opencm Digest, Vol 1, Issue
16</FONT></TR></TBODY></TABLE><BR><BR><BR><FONT size=2><TT><BR>Send opencm
mailing list submissions to<BR>
opencm@armory.com<BR><BR>To subscribe or unsubscribe via the
World Wide Web, visit<BR>
http://www.armory.com/mailman/listinfo.cgi/opencm<BR>or, via email,
send a message with subject or body 'help' to<BR>
opencm-request@armory.com<BR><BR>You can reach the
person managing the list at<BR>
opencm-owner@armory.com<BR><BR>When replying, please edit your
Subject line so it is more specific<BR>than "Re: Contents of opencm
digest..."<BR><BR><BR>Today's Topics:<BR><BR> 1. Addition of subproject
: Problem in reconfigure<BR>
(mohan_tarole@chennai.tcs.co.in)<BR> 2. RE: Addition of subproject
: Problem in reconfigure (Sharon Cohen)<BR> 3. RE: Addition of
subproject : Problem in reconfigure <BR>
(pradeep.george@philips.com)<BR> 4. RE: Addition of subproject :
Problem in reconfigure (Cao, Jean)<BR> 5. Re: Addition of subproject :
Problem in reconfigure<BR>
(Dan.Martin@slmd.com)<BR><BR><BR>----------------------------------------------------------------------<BR><BR>Message:
1<BR>Date: Mon, 26 May 2003 11:02:40 +0530<BR>From:
mohan_tarole@chennai.tcs.co.in<BR>Subject: [OpenCM] Addition of subproject :
Problem in reconfigure<BR>To: opencm@armory.com<BR>Message-ID:<BR>
<OF213581E9.4B29ED92-ON65256D32.001C5440@chennai.tcs.co.in><BR>Content-Type:
text/plain; charset="us-ascii"<BR><BR>Skipped content of type
multipart/alternative<BR><BR>------------------------------<BR><BR>Message:
2<BR>Date: Mon, 26 May 2003 09:45:13 +0200<BR>From: "Sharon Cohen"
<Sharon.Cohen@Tescom.co.il><BR>Subject: RE: [OpenCM] Addition of
subproject : Problem in reconfigure<BR>To: "Open CM Mailing List"
<opencm@armory.com><BR>Message-ID:<BR>
<8325DEA52D361C428A702C27C76171C121588F@exchange-il.il.tescom.net><BR>Content-Type:
text/plain; charset="utf-8"<BR><BR>Mohan,<BR><BR>When releasing project A,
what was the status of project B?<BR><BR>You should check your reconfigure
properties\template of project A. - can you write what folders u r
using?<BR><BR><BR><BR>Regards,<BR><BR>Sharon<BR><BR>
-----Original Message----- <BR>
From:
mohan_tarole@chennai.tcs.co.in [mailto:mohan_tarole@chennai.tcs.co.in]
<BR> Sent: Mon
5/26/2003 8:32 AM <BR>
To: opencm@armory.com <BR>
Cc: <BR>
Subject: [OpenCM] Addition of subproject : Problem in reconfigure<BR>
<BR>
<BR><BR>
Hi All, <BR>
<BR>
Thanks for support for my previous query <BR>
<BR>
I got one more problem <BR>
<BR>
I'm using Continnus CM v5.1 with UNIX client <BR>
<BR>
I've a project (say A) hierarchy with 5-subprojects under
it ( with release value X) <BR>
<BR> I
migrated one project (say B) and moved it to released state with release Y
<BR> <BR>
Now I added the project B as
subproject of project A ( I used Use command to do this) <BR>
<BR>
After making the B as subproject of A , I
released the project A. <BR>
<BR> Then I
created new release value and derived new prep project from released project A
<BR> <BR>
Now, when I'm trying to reconfigue
the new prep project, I'm getting following warning <BR>
<BR>
04/25 11:48:05 Warning: No candidates found for
directory entry B:project:1. It will be left empty!. <BR>
04/25 11:48:06 Warning!
'B~V1.1_CT:project:1' unused under 'A~6:dir:1' in project 'A~mohan' -
not a candidate. <BR>
<BR> Hope I made my
problem clear. <BR>
Waiting for your valuable suggestions <BR>
<BR>
Thanks and Regards,<BR>
Mohan <BR>
<BR><BR>-------------- next part --------------<BR>A non-text attachment was
scrubbed...<BR>Name: not available<BR>Type: application/ms-tnef<BR>Size: 5658
bytes<BR>Desc: not available<BR>Url :
http://deepthought.armory.com/pipermail/opencm/attachments/20030526/f428a832/attachment-0001.bin<BR><BR>------------------------------<BR><BR>Message:
3<BR>Date: Mon, 26 May 2003 00:45:43 -0700<BR>From:
pradeep.george@philips.com<BR>Subject: RE: [OpenCM] Addition of subproject :
Problem in reconfigure <BR>To: Open CM Mailing List
<opencm@armory.com><BR>Cc: Open CM Mailing List
<opencm@armory.com>,<BR>
opencm-bounces@armory.com<BR>Message-ID:<BR>
<OF8FA868C9.8680A639-ON88256D32.002A4BE8-88256D32.002C7BC0@diamond.philips.com><BR>
<BR>Content-Type: text/plain;
charset=us-ascii<BR><BR>Couple of questions:<BR>#1. When you checked out
project A to prep, did you also checkout the subprojects?<BR>#2. Is the
work-area of the released project maintained?<BR><BR>You should not make the
work-area of subproject B relative, and try to unmaintain it.<BR><BR>Also,
please check "reconf_consider_all_cands" keyword, that could solve your
problem.<BR><BR>Regards,<BR><BR>
\\\ | ///<BR> \\ ~
~ //<BR> ( @ @
)<BR>-------------oOOo-(_)-oOOo-------------<BR>Pradeep
George<BR>Nexperia Digital Consumer Platform Software Development
Group<BR>1140 McKay Dr.
+1 (408) 991-2823 (Work)<BR>Mail Stop- SVL-13
+1 (408) 205-8361 (Cell)<BR>San Jose, CA 95131-1706
+1 (408)
991-4077
(Fax)<BR>http://www.philips.com<BR>----------------Oooo-----------</TT></FONT>
<BR><FONT size=2><TT> oooO (
)<BR> ( ) ) /<BR>
\ ( (_/<BR>
\_)<BR><BR><BR><BR>
<BR>
<BR>
To: Open CM Mailing
List <opencm@armory.com> <BR>
cc: (bcc: Pradeep George/SVL/SC/PHILIPS)
<BR>
Subject:
RE: [OpenCM] Addition of subproject :
<BR>
Problem in reconfigure
<BR>
Sharon Cohen
<BR>
<Sharon.Cohen@tescom.co.
Classification:
<BR> il>
Unclassified
<BR>
<BR>
Sent by:
<BR>
opencm-bounces@armory.co
<BR>
m
<BR>
<BR>
05/26/2003 12:45 AM
<BR>
Please respond to Open
<BR> CM Mailing List
<BR>
<BR>
<BR><BR><BR><BR><BR>Mohan,<BR><BR>When
releasing project A, what was the status of project B?<BR><BR>You should check
your reconfigure properties\template of project A. - can you write what
folders u r using?<BR><BR><BR><BR>Regards,<BR><BR>Sharon<BR><BR>-----Original
Message-----<BR>From: mohan_tarole@chennai.tcs.co.in
[mailto:mohan_tarole@chennai.tcs.co.in]<BR>Sent: Mon 5/26/2003 8:32 AM<BR>To:
opencm@armory.com<BR>Cc:<BR>Subject: [OpenCM] Addition of subproject : Problem
in reconfigure<BR><BR><BR><BR>Hi All,<BR><BR>Thanks for support for my
previous query<BR><BR>I got one more problem<BR><BR>I'm using Continnus CM
v5.1 with UNIX client<BR><BR>I've a project (say A) hierarchy with
5-subprojects under it ( with release value X)<BR><BR>I migrated one project
(say B) and moved it to released state with release Y<BR><BR>Now I added the
project B as subproject of project A ( I used Use command to do
this)<BR><BR>After making the B as subproject of A , I released the project
A.<BR><BR>Then I created new release value and derived new prep project from
released project A<BR><BR>Now, when I'm trying to reconfigue the new prep
project, I'm getting following warning<BR><BR>04/25 11:48:05 Warning: No
candidates found for directory entry B:project:1. It will be left
empty!.<BR>04/25 11:48:06 Warning! 'B~V1.1_CT:project:1' unused under
'A~6:dir:1' in project 'A~mohan' - not a candidate.<BR><BR>Hope I made my
problem clear.<BR>Waiting for your valuable suggestions<BR><BR>Thanks and
Regards,<BR>Mohan<BR><BR><BR><BR><BR>_______________________________________________<BR>OpenCM
mailing
list<BR>opencm@opencm.net<BR>http://www.armory.com/mailman/listinfo.cgi/opencm<BR><BR><BR>[attachment
"winmail.dat" deleted by Pradeep
George/SVL/SC/PHILIPS]<BR><BR><BR><BR><BR><BR>------------------------------<BR><BR>Message:
4<BR>Date: Mon, 26 May 2003 15:28:51 -0400<BR>From: "Cao, Jean"
<jean.cao@brooks.com><BR>Subject: RE: [OpenCM] Addition of subproject :
Problem in reconfigure<BR>To: 'Open CM Mailing List'
<opencm@armory.com><BR>Message-ID:<BR>
<FDC00D02B115D41198F900508BC98B0101AAF5D1@mail-nawest1.brooks.com><BR>Content-Type:
text/plain; charset="iso-8859-1"<BR><BR>Hi Mohan,<BR>I am using Continnus CM
v5.1, I think you need to add all the task for<BR>migrate project B, then
reconfig the new prep project from released project<BR>A . It should be
fine.<BR><BR>Jean<BR><BR><BR><BR>-----Original Message-----<BR>From:
mohan_tarole@chennai.tcs.co.in
[mailto:mohan_tarole@chennai.tcs.co.in]<BR>Sent: Sunday, May 25, 2003 10:33
PM<BR>To: opencm@armory.com<BR>Subject: [OpenCM] Addition of subproject :
Problem in reconfigure<BR><BR><BR><BR>Hi All, <BR><BR>Thanks for support for
my previous query <BR><BR>I got one more problem <BR><BR>I'm using Continnus
CM v5.1 with UNIX client <BR><BR>I've a project (say A) hierarchy with
5-subprojects under it ( with release<BR>value X) <BR><BR>I migrated one
project (say B) and moved it to released state with release Y<BR><BR><BR>Now I
added the project B as subproject of project A ( I used Use
command<BR>to do this) <BR><BR>After making the B as subproject of A , I
released the project A. <BR><BR>Then I created new release value and derived
new prep project from released<BR>project A <BR><BR>Now, when I'm trying to
reconfigue the new prep project, I'm getting<BR>following warning
<BR><BR>04/25 11:48:05 Warning: No candidates found for directory
entry<BR>B:project:1. It will be left empty!. <BR>04/25 11:48:06
Warning! 'B~V1.1_CT:project:1' unused under 'A~6:dir:1' in<BR>project
'A~mohan' - not a candidate. <BR><BR>Hope I made my problem clear. <BR>Waiting
for your valuable suggestions <BR><BR>Thanks and Regards,<BR>Mohan
<BR><BR><BR>-------------- next part --------------<BR>An HTML attachment was
scrubbed...<BR>URL:
http://deepthought.armory.com/pipermail/opencm/attachments/20030526/03939cbc/attachment-0001.htm<BR><BR>------------------------------<BR><BR>Message:
5<BR>Date: Mon, 26 May 2003 21:10:02 -0700<BR>From:
Dan.Martin@slmd.com<BR>Subject: Re: [OpenCM] Addition of subproject : Problem
in reconfigure<BR>To: Open CM Mailing List
<opencm@armory.com><BR>Message-ID:<BR>
<OFA1A59246.64480081-ON88256D33.0015F077-88256D33.0016C2E7@us.datex-ohmeda.com><BR>
<BR>Content-Type: text/plain;
charset=us-ascii<BR><BR><BR>Mohan,<BR><BR>Just "Using" project B under Project
A does not change the Release value of<BR>B. If you would have done a
Reconfigure before releasing A, you would have<BR>gotten the same warning and
your project B would be empty or gone.<BR><BR>You need to copy the new Release
value to all of the objects that are under<BR>your B project by first querying
for them and then changing one object and<BR>then using Attribute Copy to copy
the release to the rest of them. Then<BR>all of your objects will
show up if you reconfigure your project A.<BR><BR>Remember your Reconfigure is
based on the Baseline which is your last<BR>Release value and then included
Tasks. Project B must still have Release<BR>Y, but project A has a
different Release value. You did not say what<BR>Release value you had
for project A.<BR><BR>Dan Martin<BR><BR><BR>
<BR>
mohan_tarole@chennai
<BR>
.tcs.co.in To:
opencm@armory.com
<BR>
Sent by:
cc:
<BR>
opencm-bounces@armor Subject:
[OpenCM] Addition of subproject : Problem in reconfigure
<BR> y.com
<BR>
<BR>
<BR>
05/25/2003 10:32 PM
<BR>
Please respond to
<BR>
Open CM Mailing List
<BR>
<BR>
<BR><BR><BR><BR><BR><BR>Hi
All,</TT></FONT> <BR><FONT size=2><TT><BR>Thanks for support for my previous
query<BR><BR>I got one more problem<BR><BR>I'm using Continnus CM v5.1 with
UNIX client<BR><BR>I've a project (say A) hierarchy with 5-subprojects under
it ( with release<BR>value X)<BR><BR>I migrated one project (say B) and moved
it to released state with release<BR>Y<BR><BR>Now I added the project B as
subproject of project A ( I used Use command<BR>to do this)<BR><BR>After
making the B as subproject of A , I released the project A.<BR><BR>Then I
created new release value and derived new prep project from
released<BR>project A<BR><BR>Now, when I'm trying to reconfigue the new prep
project, I'm getting<BR>following warning<BR><BR>04/25 11:48:05 Warning:
No candidates found for directory entry<BR>B:project:1. It will be
left empty!.<BR>04/25 11:48:06 Warning! 'B~V1.1_CT:project:1' unused
under 'A~6:dir:1' in<BR>project 'A~mohan' - not a candidate.<BR><BR>Hope I
made my problem clear.<BR>Waiting for your valuable suggestions<BR><BR>Thanks
and Regards,<BR>Mohan
_______________________________________________<BR>OpenCM mailing
list<BR>opencm@opencm.net<BR>http://www.armory.com/mailman/listinfo.cgi/opencm<BR><BR><BR><BR><BR><BR>------------------------------<BR><BR>_______________________________________________<BR>opencm
mailing
list<BR>opencm@armory.com<BR>http://www.armory.com/mailman/listinfo.cgi/opencm<BR><BR><BR>End
of opencm Digest, Vol 1, Issue
16<BR>*************************************<BR></TT></FONT><BR><BR></BLOCKQUOTE></BODY></HTML>